Skip to content

3D Printing

Note

PETG can be used, but we recommend printing in ABS or ASA for better strength and heat resistance.

All structural parts are sliced in PrusaSlicer using the 0.2mm STRUCTURAL print profile on a Prusa Core ONE.

Parts Walls Infill Supports
Default (most parts) 4 30% triangles As needed
base_core & toes 12+ 30% triangles As needed
  • base_core sees the highest structural loads, so it's printed with 12+ walls to make them effectively solid rather than relying on infill.
  • The toes are also printed with these settings as they will wear down over time.

CAD files for Hex3 are available in the GitHub or via our Hex3 Printables project